Til toppen

Ekinex EK-BK1-TP, Gateway DMX - KNX TP

Produktnummer: 10340828
Lagerbeholdning:

inkl. mva.

The ekinex® DMX - KNX Gateway performs a protocol converson between a serial RS485 DMX and a KNX TP network.

DESCRIPTION

Device working as a gateway (protocol conversion) between a DMX network and a KNX (TP) network. Mounting in distribution board on EN 60715 rail (4 modular units, each 18 mm). To be used in KNX installations for home and building automation.

FUNCTIONS / CHARACTERISTICS

DMX side
• Electrically insulated RS485 serial communication port, 1-way DIP switch to activate the line terminator (120 Ohm)
• DMX master communication
• 250 kbaud communication speed
• Device addressing from 0 to 512
• 1 byte register writing on a maximum of 512 DMX devices

KNX side
• KNX TP (twisted pair) 9600 baud communication port, electrically insulated from power supply
• Volatile support memory with "image KNX" buffer of 1440 bytes

CONFIGURATION AND COMMISSIONING

A detailed description of the parameters can be found in the application manual of the device. Configuration and commissioning require the application software CGEKBK1TP.exe