Til toppen
Produktet er ikke aktivt!

Episode EA-AMP-SUB-1D-150 Digital Subwoofer Amplifier - 150W x 1 Channel

Produktnummer: 10341489

EA-AMP-SUB-1D-150 - Episode® Digital Subwoofer Amplifier

Episode Digital Subwoofer Amplifiers are capable of delivering tons of clean power at 4 ohms, making them perfect companions for the in-wall subwoofers. These single channel amplifiers feature EQ modes and variable power-on options. That's a lot of talent wrapped in a 1U chassis.
 

Features

Connections: RCA line level connections allow you to connect additional amplifiers, while the 12V trigger allows you to connect another 12V trigger device; the amps also have dual sub outputs in parallel configuration.

Rack Mount Option: Whatever your installation requires, you will be prepared. At only 1U tall (1.75”), these amplifiers come with removable rubber feet and rack ears for direct rack mounting.

Multiple Power-on Options: Want the amplifiers always on? Don't want them on until they sense a signal? No wait, you want them to be controlled via a 12-volt trigger, right? The beautiful part is all three options are available to complement the ease of installation.

Controls: A rear-mounted rotary dial for crossover, phase, and volume control enables you to optimize any system for ultimate performance (150W only). A remote is included to provide convenient control over the EQ modes, volume settings, and power/stand-by mode (500W only).

Custom EQ Settings: EQ modes are provided for fast and simple selection of music or movies.

Cool Performers: At the heart of these units are highly efficient digital amplifiers. This cool-running technology produces clean, tight bass.

Subsonic Filter: A limiter circuit has been included at the input stage to protect the connected woofer(s) from harsh, damaging distortion that can not only ruin the listening experience, but the woofers themselves.

 

Specifications

  EA-AMP-SUB-1D-150
Channels 1
Power Output @ 4 ohm 140 watts RMS at 4 ohms
Power Output @ 8 ohm 80 watts RMS at 8 ohms
Sensitivity Input 140 mV for full output (L/LFE only driven), 150W, with level control set to max
Total Harmonic Distortion (THD) 10% THD+N 1W/2W 100 Hz
Frequency Response 30-200Hz (EQ Mode=Bypass)
Certifications TUV Listed and tested under for US and Canada
Dimensions  4.45 x 43 x 20.6;  5.3 x 48.2 x 20.6 cm  with rack mounts & feet
Weight 2.7 kg
Rack Spacing 1 U
Channels 1-Channel
External Trigger Voltage 2.0V - 20V