KeyDigital KD-MAX8x8

8x8 AUDIO MATRIX SWITCHER WITH DSP

8x8 AUDIO
MATRIX SWITCHER WITH DSP

Key Digital® KD-MAX8x8 er en 8x8-matrise for analog og digital lyd. Både innganger og utganger støtter balansert eller ubalansert analog lyd på en 6-pinners phoenix-kontakt mens digital PCM-lyd opptil 5.1 kanaler støttes med RCA-kontakter.
Hver utgang har et digitalt signal prosessor for volum, muting, 3-bånds EQ, balanse og forsinkelse.

  • Multi-format Audio Multiplexing: DSP per output for independent matrix selection
    • Analog to Analog Matrix with DSP
    • Digital to Analog Matrix with DSP
    • Digital to Digital Matrix
    • Analog to Digital Matrix
  • Audio DSP: Variable level settings for volume, muting, 3-band EQ, balance, and lip-sync delay per balanced output
  • Audio Delay: Variable level set from 0ms to 170ms
  • Audio Conversion: Analog to digital. Digital to analog
  • Balanced or Unbalanced: Input audio type may be specified per input
  • Lossless Compressed Digital Audio: Dolby® and DTS surround up to 5.1ch pass-thru
  • Long Cable Runs: Enabled by balanced audio connection, signals may be run up to 1,000 ft.
  • Expansion Configurations: Custom configurations available for incrementally expansion using multiple units
    • Up to 8 sources/inputs with up to 64 zones/outputs
    • Up to 16 sources/inputs with up to 64 zones/outputs
    • Up to 24 sources/inputs with up to 32 zones/outputs
    • Up to 32 sources/inputs with up to 32 zones/outputs
  • Control Integration: TCP/IP, RS-232, and USB with full bi-directional operation, front panel push buttons and LEDs, front/rear optical IR, serial IR,
  • Control System Support: Key Digital® App ready, Compass Control® Pro ready,
    KD-Wizard® ready. Fully controllable by all IR, RS-232, and TCP/IP supported
    control systems via open API: AMX®, Crestron®, Control4®, KNX®, RTI®, Savant,
    URC®, Leviton® etc.
  • Key Digital® App Ready: Scan & detect population for pre-built GUI and TCP/IP control via Key Digital® App
  • Input (each): Balanced/unbalanced line level audio on 6-pin terminal block. Accepts 2VRMS line audio input with a sampling rate of 48KHz
  • Input (each): RCA female for digital audio following SPDIF format (IEC 60958). Supports sampling rate up to 192KHz
  • Output (each): Balanced/unbalanced line level audio on 6-pin terminal block. Drives 2VRMS line audio input with a sampling rate of 48KHz
  • Output (each): RCA female for digital audio following SPDIF format (IEC 60958). Supports sampling rate up to 192KHz
    • Regulation: CE, RoHS, WEEE
    • Rack Mount: 1U, 1 Rack Width (rack ears included)
    • Enclosure: Black Metal
    • Product Dimensions: 17.5” x 7” x 1.75”
    • Shipping Carton Dimensions: 23.5” x 11” x 4.5”
    • Product Weight: 6 lb
    • Shipping Weight: 9 lb.

Pin It on Pinterest

Share This