KD-X422WP, 4K Power over HDBaseT/HDMI (Wallpate Tx + Rx Set) Extenders, HDR10, HDCP2.2

  • HDBaseT via Single CAT5e/6 UTP/STP Extension: With fully automatic adjustment of feedback, equalization, and amplification depending on cabling length
  • Power Over HDBaseT: Features power extension from Tx to Rx with Power Over HDBaseT, Rx unit does not require power supply
  • Installation: Designed for installation in standard US dual-gang box
  • Signal Extension:
    • Up to 150 ft. @ 4K 24/25/30(4:4:4)/60(4:2:0) using KD-CAT6STP1X cabling
    • Up to 125 ft. @ 4K 24/25/30(4:4:4)/60(4:2:0) using third-party CAT5e/6
  • UTP/STP cabling
    • Up to 250 ft. @ 1080p / 1920×1200 using KD-CAT6STP1X cabling
    • Up to 230 ft. @ 1080p / 1920×1200 using third-party CAT5e/6 cabling
  • HDCP 2.2: Compliancy up to HDCP 2.2 and backward compliant
  • HDR10 (High Dynamic Range): More life-like images through a greater range of luminance levels
  • 4K/Ultra HD Resolution: Support for 4096×2160 or 3840×2160 24/25/30Hz at 4:4:4/8 Bit or 60Hz at 4:2:0/8 Bit
  • Deep Color Support: Up to UHD/4K 30Hz 4:2:2/12 bits or 60Hz 4:2:0/8 bit
  • HDMI® and HDCP Licensing: Fully licensed and compatible with HDCP 2.2 and HDMI latest technology such as 4K/UHD 4:2:0/8bit at 60f/s
  • EDID Control: Internal library features 15 default EDID configurations and native EDID data from Output/Display devices connected via Rx
  • Hot Plug Detection Control: Enables integrator to choose if active signal voltage is forced to connected input devices
  • Full Buffer System™: Manages TMDS re-clocking / signal re-generation, HDCP authentication with source & display, EDID Control handshake, and Hot Plug control
  • IR Sensor: Sensor powering via +5V on Tx unit’s IR In port collects line-of-sigh
  • IR from remote(s) without external IR connecting block
  • Up/Down IR: Two channels of IR enable control to/from devices connected to Tx and Rx units
  • RS-232: Bi-Directional control to/from Tx and Rx unit on Phoenix connector
  • Rotary Switch RS-232 Control Mode: Provides control of Tx unit as well as connectivity status
  • Lossless compressed digital audio: Support for Dolby® TrueHD, Dolby® Digital Plus, Dolby Atmos®, and DTS-HD Master Audio™
  • CEC Support: For inter-device control between input and output HDMI channel
  • I2C Communication: EDID and HDCP authentication to Display and Source
  • Control System Support: Fully controllable by all RS-232 supported control systems via open API: Compass Control®, AMX®,
  • Crestron®, KNX®, RTI®, Savant, URC®, Leviton® etc.
  • Regulation: CE, RoHS, WEEE
  • Enclosure: Tx unit: Brushed aluminum face with black metal backing Rx unit: Black metal
  • KD-X422WPTx (Wallplate): 3.21” x 2.06” x 0.787”, Weight: 0.7 lbs
  • KD-XWPRx: 5.07” x 4.08” x 0.787”, Weight: 0.4 lbs
  •  KD-X422WP Power (Tx Only): KD-PS12V2A, 12V/2A, 100-240VAC, 50-60Hz,
    Interchangeable head with stripped wires
  • Accessories: (1) Rx unit mounting bracket, (1) IR emitter,
    (1) IR sensor, (1) 2 pin terminal plug, (2) 3 pin terminal plug,
    (1) 4 pin terminal plug

Pin It on Pinterest

Share This