Parasound Newclassic integrated 200

PARASOUND NEWCLASSIC 200 INTEGRATED

Parasound har introdusert sin nye NewClassic 200 Integrated forsterker med innebygd DAC. Forsterkeren tilbyr enestående lydkvalitet og utmerkede tilkoblings muligheter.  I hjertet av 200 Integrated er en klasse D forsterker på 2×110 Watt i 8 Ohm. Signalvei inkluderer en analog bass kontroll med høypass og lavpass utganger.
200 Integrated har innganger for omtrent hvilken som helst kilde, inkludert phono MM / MC, to linje innganger, theater by-pass og to subwoofer utganger, utgang fra forforsterker, USB, koaks og optisk. Videre finnes en aux inngang i frontpanelet med 12 dB forsterkning for å forbedre lydkvaliteten for bærbare enheter. I front finner du også inngang for egen hodetelefon forsterker.
Parasound Halo P 5 forforsterker var kjent for sin hjemmekino bypass og delefrekvens funksjoner pluss sin vellydende DAC. 200 Integrated hjemmekino bypass og DAC er nesten identisk og med en justerbar 20-140 Hz high-pass delefrekvens for L og R-utgangene, og benytter samme Burr-Brown DAC.
Praktiske og tilpassede installasjons funksjoner inkluderer forhåndsinnstilt volum, en favoritt volum innstilling, en toveis RS232 seriell port, IR-inngang og 12V-utgang. Input offset (nivå matching) sikrer at alle kilder spiller på samme nivå, uavhengig av utgangs nivåene. Den dimmbare LCD-skjermen i frontpanelet har mulighet for å tildele navn for hver kilde inngang. Fjernkontrollen inkluderer justeringer for L-R-balanse, bass og diskant justering, subwoofer på-av og til og med subwoofer nivå.

With the NewClassic 200 Integrated, Parasound has done a masterful job of blending a quality pre-amp with a sweet-sounding amp section. It’s neutral and transparent sound will make any speaker you hook up to it sound amazing!
– HIFITrends.com

NewClassic 200 Integrated galleri – trykk for større bilde

Omtaler av NewClassic 200 Integrated

Smiley face
This Mind-Blowing Amp Will Make Your Speakers Sing!
– HiFiTrends.com

An affordable integrated amplifier-DAC with substantial power, high-quality conversion, flexible inputs and outputs, and full-function remote. Bravo.
-Sound & Vision

With the NewClassic 200 Integrated, Parasound has done a masterful job of blending a quality pre-amp with a sweet-sounding amp section. It’s neutral and transparent sound will make any speaker you hook up to it sound amazing!
– HIFITrends.com

When you compare the Parasound NewClassic 200’s retail price against its feature set and standout audio quality, the value is obvious and remarkable. If you love accuracy, detail retrieval, and neutrality then it’s an excellent choice.
– theaudiobeatnik.com/

There’s also a ton of features that make it a flexible component you will be able to use for years to come. This amp is a beast, so if you are looking for an Amp/DAC‌ combo in the 1k range, you owe it to yourself to give it a listen!
– HIFITrends.com

Simple, utilitarian, unfancy—these may sound like left-handed compliments, but in my lexicon they are the highest praise. (Anyway, «left-handed» is the ultimate encomium to us sinistrals.) Parasound’s 200 Integrated is not just all of these but also audiophile and adaptable enough to get all the music out of your music, and all the functionality out of your system.
-Sound & Vision

• 110 Watts @ 8 or 4 Ohms
• Class D amplification by Pascal
• Burr-Brown 192kHz-24 bit DAC from the Halo P 5
• USB, Optical and Coax digital audio inputs
• 4 Analog audio inputs
• Phono input for MM or MC cartridges
• Pure analog signal path from input to output
• Analog bass management w/ variable 20-140Hz high pass crossover
• Subwoofer On/Off & level by remote control
• 80Hz low pass subwoofer output
• Full range mono output can be used for subwoofer or mono listening area
• Variable and fixed stereo preamp outputs
• Bypass input for surround sound or music streamer integration
• Default turn on volume memory
• Favorite volume memory with remote control button
• Input level matching (source volume offset)
• Bass, treble and balance adjustments by remote control
• Front panel LCD display with dimming
• 2-way RS232 w/ exact volume control & feedback
• Control4 drivers and module available for download
• Rename inputs to match connected source
• Front panel Aux input with12dB of additional gain
• Dedicated headphone amplifier
• Back-lit remote control with discrete buttons
• 12V trigger output
• Rear panel IR input
• 0.5w standby power consumption meets Energy Star & EU specs
• 1U rack mount kit sold separately (model RMK-11)

Power Output – Both channels driven
(0.05% THD, 20 Hz – 20 kHz)
110 watts x 2 @ 4 Ω or 8 Ω (RMS)

Power Output – Both channels driven
(1% THD, 20 Hz – 20 kHz)
125 watts x 2 @ 4 Ω or 8 Ω (RMS)

Frequency Response:
20 Hz – 20 kHz, +0 / -0.05 dB
10 Hz – 80 kHz, +0 / -3 dB

Total Harmonic Distortion (20 Hz – 20 kHz):
< 0.05 %, (110 watts, 8 Ω)

Interchannel Crosstalk:
-75 dB at 20 kHz
-85dB at 1 kHz

Preamp Output:
250mv = 1V output
Total gain = 12 dB (volume set to 100)
Unity gain = Volume set to 76
Maximum output = 3.5V

Phono Stage Gain / Input Impedance:
MM: 40 dB / 47 k Ω
MC: 50 dB / 100 Ω

Line Level Input Impedance: 24k Ohms

Preamp Output Impedance: 470 Ohms

S/N Ratio – Line Inputs:
> 100 dB, input shorted, IHF A-weighted

S/N Ratio – Digital Inputs:
> 110 dB, input shorted, IHF A-weighted

DAC IC: Burr-Brown PCM1798

DAC Maximum Sampling Rates (PCM only):
USB: 96kHz – 24 bit
Optical: 192kHz – 24 bit
Coax: 192kHz – 24 bit

DC Trigger Output: 12 Vdc, 50mA

AC Power Requirement:
Standby: 0.5 watts
Idling: 15 watts (no music playing)
Typical: 50 watts (music playing)
Maximum: 300 watts
100-250 VAC 50/60 Hz (automatic)

Dimensions:
Width: 17.25” (438 mm)
Depth: 14.75” (375 mm)
Depth: 16.75” (425 mm) with cables connected
Height, with feet: 2.5” (63.5 mm)
Height, without feet: 1.75” (44.5 mm), 1U
Rack mounting requires RMK-11(sold separately)

Weight:
Net: 11.5 lbs (5.2 kg)
Shipping: 17.5 lbs (7.9 kg)

Dokumentasjon om alle Parasound produkter

 

Parasound Manualer Parasound Brosjyrer

Pin It on Pinterest

Share This