Parasound Halo JC1 +
Parasound Halo JC1 +

PARASOUND HALO JC 1+

Parasound nye Ultra-High-End Monoblock forsterker

JC 1+ er Parasound sin nye høyeffektive mono effektforsterker. Det å lage en forsterker som er i stand til å fremkalle den aller beste ytelsen fra de fineste høyttalerne, og samtidig overgå konkurentene med langt høyere pris, gjør JC 1+ til Parasounds mest ambisiøse product til nå. Parasound rekrutterte nok en gang et design team ledet av den legendariske lyddesigneren, John Curl. Mannen med initialene «JC» star bak selskapets kritikerroste og kjente JC 1, JC 2BP, JC 3+, JC 3 Jr.

JC 1+ er kulminasjonen på fem års design, prosjektering og streng testing. Innovasjoner og fremskritt i Halo JC 1+ gjør den overlegen i alle henseender til den originale JC 1 – ingen liten bragd, med tanke på at JC 1 er blant de mest anerkjente og populære forsterkere i lydhistorien. Med en kraftleveranse på 450 watt RMS til 8 ohm, 850 watt RMS til 4 ohm, og 1.300 watt RMS ned til 2 ohm – sammen med en topp strømkapasitet på 180 ampere, fremkaller JC 1+ fantastisk ytelse fra de fleste høyttalerne. De første 25+ watt i ren klasse A vil virkelig få høyttalerne dine til å synge.

I’ve not heard any other monoblock entrant at or even close to this price that is able to recreate so many aspects of music with a more authentic voice. These amps are magnificent performers in nearly every regard.

– Positive Feedback

Parasound Halo JC 1+ galleri – trykk for større bilde

Omtaler av Parasound JC 1+

 

I’ve not heard any other monoblock entrant at or even close to this price that is able to recreate so many aspects of music with a more authentic voice. These amps are magnificent performers in nearly every regard.
– Positive Feedback

the improvement in its sound quality and the explosion in recent years in the prices of high-end, high-power amplifiers keep the JC 1+ competitive. This is a superb-sounding amplifier that will get the best from every loudspeaker with which it is partnered. Well done, Mr. Curl.
– Stereophile John Atkinson

Power Output
450 x1 watts @ 8 Ω
850 x1 watts @ 4 Ω
1300 x1 watts @ 2 Ω
Power measurements are with 120 VAC:
0.15% THD, RMS continuous power,
full audio band (20 Hz – 20 kHz)
Class A Power Output
25 Watts, bias switch set to high
10 Watts, bias switch set to low
Current Capacity
180 amps, peak
Slew Rate > 130 volts per microsecond
Frequency Response
2 Hz – 120 kHz, +0/-2 dB
20 Hz – 20 kHz, +0/-0.25 dB
Total Harmonic Distortion (THD)
< 0.15 % at full power
< 0.02 % at typical listening levels
IM Distortion
< 0.03 %

TIM
Unmeasurable
Damping Factor
> 1200 at 20 Hz
Input Impedance
Unbalanced: 50 kΩ
Balanced: 100 kΩ, (50 kΩ per leg)
S/N Ratio, inputs shorted
>122 dB, IHF A-weighted, bias set to Low
>120 dB, IHF A-weighted, bias set to High
>113 dB, Unweighted, bias set to Low
>111 dB, Unweighted, bias set to High
Total Gain
29 dB (Gain switch set to normal)
23 dB (Gain switch set to low)
Input Sensitivity for 28.28 V
Output into 8 Ω
Unbalanced: 1 V
Balanced: 1 V per leg
(Gain switch set to normal)
DC Trigger Requirements
+9 Vdc to +12 Vdc, 5 mA
Audio Trigger Requirement
2.5 mV – 10 mV

XLR Pin Identification
1 = Ground (Shield)
2 = Positive
3 = Negative (Return)
Dimensions
Height without feet: 7-1/8″ (181 mm)
Height with feet: 7-3/4″ (197 mm)
Depth: 20″ (508 mm)
Depth with cables: 21-1/2″ (546 mm)
Shipping Carton Dimensions
Width: 29-1/2″ (750 mm)
Depth: 27-1/2″ (700 mm)
Height: 15-3/4″ (400 mm) Net Weight
83 lb. (37.6 kg)
Shipping Weight
107 lb. (48.5 kg)
Power Requirement
Standby: <1 Watt
Idle (bias set to low): 145 Watts
Idle (bias set to high): 275 Watts
Typical Listening levels: 400 Watts
Maximum: 1500 Watts

  • Circuitry designed by legendary John Curl
  • Ultra-high bias Class A/AB operation
  • 25 watts of pure Class A power
  • Stable with speaker impedance dips below 1Ω
  • Bybee Music Rails™ – active high frequency filters for input stage
  • New John Curl driver stage employs a cascode circuit for greater open loop bandwidth & superior linearity
  • Gain switch to select 29 dB or 23 dB gain for optimum compatibility with high gain preamps or extremely efficient speakers
  • R-core transformer for input stage suppresses noise on power line
  • 6 massive 33,000 uF Nichicon Gold Tune filter capacitors for output stage
  • 22,400 uF input stage power supply filter capacitors, independent of the main power supply
  • Dual CHK Infinium, custom 5-way speaker binding posts for easy bi-wiring
  • Neutrik locking XLR balanced input & loop output jacks
  • Vampire 24k gold-plated RCA input & loop output jacks
  • Direct-coupled signal path, no capacitors or inductors in the audio path
  • JFET input stage, MOSFET driver stage
  • 24 beta-matched 15 ampere, 230V, 60 MHz bipolar output transistors
  • 2.1 kVA shielded toroid power transformer with premium H18 grade core
  • Independent power supplies for input stage, driver stage & output stage
  • Full power is rated all the way down to 2Hz for unrestricted low-end bass
  • Harris hyper-fast soft-recovery bridge diode rectifiers
  • REL & Nichicon Muse capacitors
  • DC servo & relay protection circuits
  • AC turn-on inrush surge protection with relay bypass
  • Automatic turn-on by 12 V trigger or audio sensing
  • 4 rack space chassis with rear carry handles
  • Rack mount hardware is included
  • Available in silver or black

Dokumentasjon om alle Parasound produkter

 

Parasound Manualer Parasound Brosjyrer

Endringer fra originale JC 1 to JC 1+

• 400  450 Watts @ 8Ω
• 800  850 Watts @ 4Ω
• 1200  1300 Watts @ 2Ω
• Filter capacitance: 132,000 198,000 uF
• Transformer capacity: 1.9  2.1 kVA
• Output transistors: 18  24 devices
• Peak current: 135  180 amps
• Weight: 64  83 pounds
• Bybee Music Rails™ high frequency noise filters
• John Curl driver stage employs a new cascode circuit design
• FR-408 input circuit board material improves signal integrity
• Gain switch to select 29 dB or 23 dB of gain
• R-core transformer for input stage
• Input circuit board is shielded
• Double thick copper on output/power supply circuit boards
• Gold-plated internal audio connectors
• Custom CHK Infinium “propeller style” speaker binding posts
• Looping XLR output for easier bi-amping
• Front panel power indicator LED
• Updated auto turn on circuits & 3.5mm 12V trigger jacks

Pin It on Pinterest

Share This