Parasound Zonemaster 2350
Parasound Zonemaster

ZONEMASTER 2350

Parasound ZoneMaster 2350 to-kanals stereo og subwoofer forsterker er designet for å kunne tilfredsstille custom-install markedet. Med 2×600 watt vil den drive en hvilken som helst høyttaler eller passiv subwoofer. Et 30Hz og 80Hz høypass filter hindrer at dyp bass når mindre høyttalere. Et innebygd analogt 80Hz, 24dB / oktav lavpass filter gjør ZoneMaster 2350 til enestående forsterker til å drive flere passive subwoofere uten behov for eksterne delefiltre.

The Parasound ‘ZoneMaster’ 2350! One hell of a Class-D amp!
– Zero Fidelity

  • Power Output
  • RMS, Both Channels Driven (20 Hz – 20 kHz)
  • 350 watts x 2 @ 8 Ω
  • 600 watts x 2 @ 4 Ω or 2 Ω
  • Minimum Speaker Impedance (Output A+B)
  • Stereo or Mono Mode: 2 Ω
  • Subwoofer Mode: 4 Ω
  • Note: Operation at these minimum impedances might require additional ventilation.
  • Frequency Response
  • 10 Hz – 70 kHz, +0/-3 dB
  • 20 Hz – 20 kHz, +0/-0.8 dB
  • Total Harmonic Distortion
  • < 0.05 % at typical listening levels
  • < 0.9 % at full power Inter-channel Crosstalk  70 dB at 20 kHz Input Sensitivity:  2 Volts = Full output (350 Watts @ 8 Ω)  Total gain = 29 dB (Level controls set to Maximum) S/N Ratio  > 100 dB, input shorted, unweighted
  • > 114 dB, input shorted, IHF A-weighted
  • High and Low Pass Crossovers
  • Sub Mode and Sub out jack: 80 Hz, 24 dB per octave
  • High Pass Filter: 30 Hz or 80 Hz, 12 dB per octave
  • DC Trigger Requirements
  • +9 Vdc to +12 Vdc, 5 mA
  • Audio Trigger Requirements
  • 2 mV audio signal (8-15 minutes turn off delay)
  • AC Power Requirement
  • 1500 Watts maximum
  • 100 Watts typical (music playing, typical listening level)
  • 30 Watts idle (no music playing)
  • 0.5 Watts in standby
  • 110-240 VAC 50/60 Hz
  • Dimensions
  • Width: 17.25″ (438 mm)
  • Depth: 14.5″ (368 mm)
  • Depth: 16.25″ (412 mm) with cables connected
  • Height, with feet: 4.25″ (108 mm)
  • Height, without feet: 3.5″ (89 mm), 2U
  • Weight
  • Net: 15 lbs. (6.8 kg)
  • Shipping: 22.25 lbs. (10.1 kg)
  • 350 watts x 2 @ 8 Ω
  • 600 watts x 2 @ 4 Ω
  • 2 Ω stable for driving multiple speaker pairs
  • Two pairs of speaker outputs with A/B buttons
  • Lockout switch on rear panel to disable A/B buttons
  • High pass filter, switchable for 30Hz or 80Hz
  • Automatic on/off by 12V trigger w/ looping output
  • Automatic on/off by audio signal
  • Speaker level input enables integration with systems lacking preamp output jacks
  • Parasound designed class AB input stage w/ premium Class D power stage
  • Subwoofer mode for driving multiple in-wall subs without the need for an external crossover
  • Mono mode combines L and R for single speaker applications
  • Mono full range preamp output
  • Subwoofer 80Hz, 24dB/oct. low pass preamp output
  • Looping left and right output jacks
  • Left and right input level controls
  • Efficient, low heat design
  • Short circuit and overload protection
  • 0.5 watt standby power consumption meets EU and Energy Star requirements
  • 2U rack mounting hardware is included in box

Dokumentasjon om alle Parasound produkter

 

Parasound Manualer Parasound Brosjyrer

CEDIA 2017

Pin It on Pinterest

Share This