Til toppen

Ekinex EK-HA1-TP, Fancoil actuator/controller

Produktnummer: 10340568
Lagerbeholdning:

inkl. mva.

The ekinex® EK-HA1-TP fancoil actuator / controller allows to control a fan coil unit for the air conditioning of a room.‎

DESCRIPTION

KNX bus device with actuator function (in combination with a KNX room temperature controller) or controller / actuator (with acquisition of the temperature value by a KNX sensor or by a sensor connected to an analog input). For installations in 2-pipe hydraulic distribution systems with ON / OFF control of an electrothermal actuator on a shut-off valve and a 3-speed fan. The outputs not used for controlling a fan coil unit can be configured as outputs to carry out other functions. Mounting in distribution board on EN 60715 rail (4 modular units, each 18 mm). To be used in KNX installations for home and building automation.

FUNCTIONS / CHARACTERISTICS

• Power supply from the bus and auxiliary power supply 230 Vac 50/60 Hz
• Control of 2-pipe hydraulic distribution systems with shutoff valve ON/OFF (1 SPST relay)
• 3 relay outputs to control a 3-speed fan
• 2 inputs freely configurable for acquisition of passive temperature sensors (10 kΩ NTC at 25°C) or as potential-free binary inputs

CONFIGURATION AND COMMISSIONING

A detailed description of the parameters can be found in the application manual of the device. Configuration and commissioning require ETS4 or later versions. ETS application program: APEKHA1TP##.knxprod (## = release). Available languages: English, French, German, Italian

Ekinex EK-FE1-TP, 8-fold KNX binary output

The ekinex® EK-FE1-TP binary output / blind actuator allows to command 8 groups of loads or control 4 drives for motorised blinds independently.‎ 
10302692

Ekinex EK-FF1-TP, Binary output 16-fold

The ekinex® EK-FE1-TP binary output / blind actuator allows to command 16 groups of loads or control 8 drives for motorised blinds independently.
10340645

Ekinex EK-HC1-TP, Fancoil actuator/controller

The ekinex® EK-HC1-TP fancoil actuator / controller allows to control a fan coil unit for the air conditioning of a room.‎
10340634