Til toppen

Ekinex EK-GL1-DL, 4 x channel DALI dimmer

Produktnummer: 10362009
Lagerbeholdning:

inkl. mva.

The 4-channel DALI dimmer EK-GL1-DL allows dim-to-warm lighting control of dynamic white, RGB and RGBW of dimmable LED light

The 4-channel DALI dimmer EK-GL1-DL allows dim-to-warm lighting control of dynamic white, RGB and RGBW of dimmable LED light sources thanks to a KNX (TP) buttons connected via DALI/KNX Gateway or by other local control devices, directly connected to dedicated inputs selectable among normally open buttons, 0 to 10V analog inputs, 1 to 10V analog inputs or 10 kΩ potentiometers.

The device has a built-in DALI communication bus and it requires a 12, 24 or 48 Vdc auxiliary power supply.

FUNCTIONS / FEATURES

FUNCTIONS

  • Memory function
  • Brightness control dim-to-dark
  • Minimum brightness level: 0,1% (1% in push)
  • Pulse Width Modulation with configurable frequency (300/600/1200 Hz)
  • Adjustable dimming curves (linear dimming curves, logarithmic diming curves, square law dimming curves)
  • Soft switching
  • Optimized output curve

 

FEATURES

  • Plastic case
  • Device for four modular units (1 MU = 18 mm)
  • Mounting on DIN 35 mm profile rail (EN 60715)
  • Degree of protection IP10 (once the device has been installed)

 

CONNECTIONS

  • Screw terminals for DALI bus, command, power supply and LED source
  • Maximum length of the connection between dimmer-driver and command < 10 m

CONFIGURATION AND COMMISSIONING

12 pins dip switch to set the kind of LED load, parallel outputs, the dimming curve, the input source (local controls) and the dimming frequency