Til toppen

Ekinex EK-GO1-DL, 4 x channel DALI dimmer

Produktnummer: 10362011
Lagerbeholdning:

inkl. mva.

The 4-channel DALI dimmer EK-GO1-DL allows lighting control of dimmable LED and halogen light sources thanks to a KNX (TP) button connected via DALI/KNX Gateway

The 4-channel DALI dimmer EK-GO1-DL allows lighting control of dimmable LED and halogen light sources thanks to a KNX (TP) button connected via DALI/KNX Gateway or by another device, directly connected to the dedicated input selectable among normally open button, 0 to 10V analog input, 1 to 10V analog input or 10 kΩ potentiometer. The 4 phase-cut outputs (trailing edge) at 230 V are suitable for R-C loads.

The device has a built-in DALI communication bus, it is powered by 230 Vac mains voltage and it does not require an auxiliary power supply.

FUNCTIONS / FEATURES

FUNCTIONS

  • Memory function
  • Brightness control
  • Adjustable minimum brightness
  • Soft switching
  • Optimized dimming curve

 

FEATURES

  • Plastic case
  • Device for eight modular units (1 MU = 18 mm)
  • Mounting on DIN 35 mm profile rail (EN 60715)
  • Degree of protection IP10 (once the device has been installed)

 

CONNECTIONS

  • Screw terminals for DALI bus, command, power supply and LED source
  • Maximum length of the connection between dimmer-driver and command < 10 m

CONFIGURATION AND COMMISSIONING

  • 6 pins dip switch to set the input source (local controls)
  • 8 pins dip switch to set the minimum dimming (range:0-20%), independently for the 4 output channels