Til toppen
Sorter etter:

Control4 C4-SDAPD240-N

Square Dual Load Wireless Adaptive Phase Dimmer, 240V (Neutral)

Control4 C4-DIN-BPS48

The Control4® Bus Power Supply is intended for use in a Control4 system. This device installs in a Control4 Panelized Lighting panel or in any standard DIN rail panel with 35mm rails. The Bus Power Supply provides the power to the Bus Ethernet Gateway (C4-DIN-BEG) and Control4 wired keypads (C4-KCB-xx and C4-SKCB-xx) in a Panelized Lighting system.

Control4 C4-DIN-8REL-E2

The Control4® 8-Channel Relay controls up to eight (8) high in-rush loads from one module in the Contro4® system. Each channel supports a variety of load types including Incandescent, Halogen, Electronic Low Voltage Transformers, Magnetic Low Voltage Transformers, Fluorescents, Compact Fluorescents, LEDs and Motors.

Control4 C4-DIN-8ESW

The Control4® 8-Port Ethernet Switch is a standard 8-port 10/100 switch that allows a single Ethernet CAT5e cable to be pulled into a lighting panel, and then distributed to up to seven (7) other Control4® panelized lighting devices including Dimmer, Relay, and Bus Ethernet Bridge Modules within the panel.

Control4 C4-DCIM4

The 4-Channel Bus Dry Contact Input Module allows up to four toggle switches or other dry contact closures to trigger lights, scenes or any other automation event in a Control4 system.

Control4 C4-DIN-8TV-E

The Control4® 8-Channel 0-10V Dimmer controls up to eight (8) 0-10V dimmable fluorescent ballasts or LEDs. Each channel can control up to 50 ballasts. Individual 0-10V lights can be programmatically tied to a corresponding channel on a Control4® 8-Channel Relay module for on/off control of the ballast or LED when needed. Alternatively, the Control4 8-Channel 0-10V Dimmer module also has eight (8) low-voltage outputs for triggering external power relays.