The ekinex® EK-HC1-TP fancoil actuator / controller allows to control a fan coil unit for the air conditioning of a room.
KNX bus device with actuator function (in combination with a KNX room temperature controller) or controller / actuator (with acquisition of the temperature value by a KNX sensor or by a sensor connected to an analog input). For installations in 2 or 4-pipe hydraulic distribution systems with ON / OFF control of one or two electrothermal actuators for shut-off valves; control of a 3-speed fan or 0-10 V control of a fan with brushless motor. The outputs not used for controlling a fan coil unit can be configured as output channels to carry out other applications. Mounting in distribution board on EN 60715 rail (4 modular units, each 18 mm). To be used in KNX installations for home and building automation.
FUNCTIONS / CHARACTERISTICS
• Power supply from the bus and auxiliary power supply 230 Vac 50/60 Hz
• Control of 2 or 4-pipe hydraulic distribution systems with shutoff valve ON/OFF (2 SPST relays)
• control of a 3-speed fan or 0-10 V control of a fan with brushless motor
• 3 inputs freely configurable for acquisition of passive temperature sensors (10 kΩ NTC at 25°C) or as potential-free binary inputs
CONFIGURATION AND COMMISSIONING
A detailed description of the parameters can be found in the application manual of the device. Configuration and commissioning require ETS4 or later versions. ETS application program: APEKHC1TP##.knxprod (## = release). Available languages: English, French, German, Italian
Vi sender regelmessig ut info til våre kunder om nye produkter, omtaler, tester, rapporter fra messer og informasjon om nye produsenter
Meld deg på her!
Norwegian Custom Media Solution as
Gamle Drammensvei 107
Tlf: 67 48 01 00
NO 985 374 295 MVA