6 Zone Compact 230v Wiring Centre
The Heatmiser UH6 is our 6 Zone underfloor heating wiring centre designed to work with our 230v Thermostats.
The UH6 wiring centre provides central switching and is therefore ideally situated next to the underfloor heating manifold. On demand from any zone, a 230v output is provided to switch the relevant zone actuators, underfloor heating pump and valve. A volt free connection is supplied for the boiler, making it compatible with almost all types of boilers.
Heat & UFH Pump Delay
When there’s a demand it is possible to set a timed delay, before activating the Pump & Heat* outputs
During hot weather the heating may not be required as often, which means after long periods of the UFH pump not being used, the pump can seize and refuse to operate.
To prevent this, it is good practice to operate the pump once a day, the creepage function does this for you. Once enabled the UH6 wiring centre will operate the pump for 1 minute, only if the outputs have not been operated by a thermostat, within the preceding 24 hours. This function does not operate the HEAT output.
Up to 4 actuators can be connected to each zone.
Vi sender regelmessig ut info til våre kunder om nye produkter, omtaler, tester, rapporter fra messer og informasjon om nye produsenter
Meld deg på her!
Norwegian Custom Media Solution as
Gamle Drammensvei 107
Tlf: 67 48 01 00
NO 985 374 295 MVA