Wall-Smart "Retrofit mount" til Control4 C4-T4IW8, "Unpainted"

• Retrofit​
• For low voltage (POE) only - line voltage connector is blocked
• Does not require control4 back box.​
• Nearly flush with the wall (4mm [0.16”] thick on-wall bezel). 
• With speaker/mic grills. 
• Bezel attaches magnetically to the retrofit wall mount base. 
• The bezel is supplied unpainted (-WO)
• Wall mount contains depth calibration screws.
• Board thickness 10mm[0.39"] up to 21mm[0.83"]. For boards up to 32mm[1.25"] thick, reinstall cam latches upside down.

Key properties:

• Dimensions: (W /H/D): 256mm (10.08)/ 195.8mm (7.71")/ 48mm (1.89”)